Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
14.1. Specifications
14.2. Detection of malfunctions
14.3. Safety locks and the relay
14.4. Switches
14.5. Lamps of external illumination
14.6. Lamps of internal illumination
14.7. Devices of external illumination
14.8. Adjustment of headlights
14.9. The panel of devices
14.10. A sound signal
14.11. A cable of a drive of a speedometer
14.12. The lever of brushes of a screen wiper
14.13. The electric drive of a cleaner of a windscreen
14.14. The electric drive of a cleaner of back glass
14.15. Details of screen wipers
14.16. A radio tape recorder
14.17. Dynamics
14.18. The aerial
14.19. Pillows of system of safety
14.20. Electric equipment schemes
 







14-5-lampy-naruzhnogo-osveshheniya.html

14.5. Lamps of external illumination

New lamps should correspond to the replaced completely. At replacement be convinced of cleanliness and reliability of contacts.

Replacement

PERFORMANCE ORDER
Headlights
1. Open a cowl
2. Press latches and disconnect a socket.
3. Uncover, having turned counter-clockwise.
4. Remove a rubber cover.
5. Get the holder of a lamp, having pressed on a latch.
6. Get a lamp.
7. A new lamp hold only through a pure napkin, without concerning with fingers.
8. Establish a new lamp so. That the ledge of the holder has come into dredging in the headlight case. Dress a cover an inscription upwards and attach a socket.
Dimensional lantern
1. Open a cowl
2. Press latches and disconnect a socket.
3. Get the holder of a lamp, having turned counter-clockwise.
4. Get a lamp from the holder.
5. Insert a new lamp and establish upside-down.
The turn index
1. Open a cowl and turn away screws of a plafond of the index of turn in the top its external part.
2. Disconnect the bottom hinge and hook and cautiously get a plafond from a wing.
3. Get the holder of a lamp, having turned counter-clockwise.
4. The lamp fastens in the holder байонетным connection.
5. Establish a new lamp upside-down. At installation track, that the ledge on a plafond has come into a body aperture.
The repeater of turns
1. Displace a plafond forward and disconnect from the wing panel.
2. Get a plafond, turn out the holder counter-clockwise.
3. Get a lamp, having pulled from the holder.
4. Establish a new lamp upside-down.
Projector
1. Turn away two screws of fastening of a projector, adjusting screws do not touch.
2. Get a projector, remove a back cover, having turned counter-clockwise.
3. Get a lock ring and a lamp, disconnect a socket.
4. Undertake a lamp only through a pure napkin.
5. Insert a new lamp, having combined a ledge and dredging in a plafond.
6. Fix a lamp a lock ring, attach a socket.
7. Wrap a cover, establish a plafond and wrap screws.
Forward antifog headlights
1. Turn away two screws, do not touch screws of adjustment of a bunch.
2. Disconnect a socket, get a lock ring and a lamp.
3. Establish a lamp upside-down.
Back combination of lamps
1. Open a luggage carrier cover (a cargo compartment).
2. Get a latch and open лючок in a back overlay.
3. Get the holder of lamps.
4. Lamps fasten in the holder байонетным connection.
5. Replace a lamp and establish the holder upside-down. On a lamp of a signal of braking / of a dimensional lantern adjusting lugs are provided.
Lamp of illumination of licence plate
1. Turn away two screws and get a plafond from a back cover.
2. Pull and get a lamp.
3. Establish a new lamp upside-down.


14.4. Switches

14.6. Lamps of internal illumination