Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.3.1. Elimination of small scratches on a body
13.3.2. Repair of dents of a body
13.3.3. Elimination of consequences of corrosion or cracks in body panels
13.3.4. Drawing of a first coat and body painting
13.3.5. Plastic elements
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment
 







13-3-melkie-povrezhdeniya-kuzova.html

13.3. Small damages of a body

If the scratch only is superficial and does not get into body metal, it to eliminate very simply.

PERFORMANCE ORDER
1. Wipe area round a scratch means for restoration of a paint or process very small polishing paste to eliminate from a scratch the lagged behind paint and to clear surrounding surface of a wax covering.
2. Wash out this area pure water.
3. Put a new paint on a scratch by means of a thin brush; continue to put thin paint coats while the paint surface on a scratch will not be flush with surrounding paint.
4. Wait within at least two weeks while the paint will harden, then mix it with surrounding paint, having processed scratch area a regenerative solution or very small polishing paste.
5. Then put wax polishing.

If the scratch has got into body metal, having caused a metal rust, it is necessary to use other method.

PERFORMANCE ORDER
1. Remove a rust from a bottom of a scratch by means of a knife edge, then put a layer of an anticorrosive paint for prevention of formation of a rust in the future.
2. By means of a rubber or nylon small brush fill a scratch with a first coat.
3. If it is necessary, the first coat can be mixed with a thinner for formation of very liquid paste which perfectly approaches for filling of thin scratches.
4. Before the first coat will harden, wrap up a piece of a soft cotton fabric round a finger.
5. Lower a finger in a thinner, and quickly spend it on a first coat surface on a scratch, it is necessary that the first coat surface was a little bent.
6. The scratch then can be painted over.


13.2.2. An upholstery of salon and rugs

13.3.1. Elimination of small scratches on a body











https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ