Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment
 







13-24-paneli-oblicovki-salona.html

13.24. Panels of facing of salon

Internal facing panels fasten metal either plastic latches or clamps which are recommended to be got вильчатым a stripper.

In some places for removal of the given panel it is required to remove the next panels.

Removal and installation

PERFORMANCE ORDER
The facing panel in a niche of feet of the driver
1. Hook and get an overlay, turn away screws.
2. Turn and get a back clamp, remove the panel.
3. Establish the panel upside-down.
Overlays порожка
4. Disconnect an aperture sealant, hook an overlay and release latches.
5. At installation press an overlay before click.
Overlay of a rack of a body
6. Disconnect a door sealant, hook and remove an overlay.
7. At assemblage accurately insert a door sealant.
The internal panel of a door
8. Subsection 13.11 see.
Back shelf (sedan)
9. Remove a back armrest.
10. Disconnect two forward plastic latches of a tray of a shelf.
11. Hook behind and remove a shelf tray.
12. If necessary it is possible to remove a shelf in gathering for what turn away the bottom bolt of a seat belt and pass a belt through лючок regiments.
13. Establish a shelf upside-down.
Internal facing of a luggage carrier (sedan)
14. For removal of the back panel remove a sealant and submit the panel upwards, having disconnected from скоб.
15. The luggage carrier flooring fastens plastic clamps. Remove arms of fixing tapes and a plafond then get rugs.
16. Assemblage is carried out upside-down.
Internal facing of a luggage carrier (a compartment and a hatchback)
17. Get plastic заглушки and turn away 4 screws of fastening of the back panel.
18. The luggage carrier flooring acts in film as follows.
19. Lift a back part of a flooring.
20. Hook and disconnect latches of a back part of a flooring from a body.
21. Assemblage is carried out upside-down.
The internal panel of a cover of a luggage carrier (sedan)
22. Hook and disconnect plastic latches, get the panel from скоб in a back part of a cover and remove.
23. Assemblage is carried out upside-down.
Internal facing of a cargo compartment (hatchback)
24. Hook and disconnect plastic latches, turn out screws. Cautiously submit the facing panel вильчатым a stripper, having got the latches hidden under a back part of the panel (a photo at the left) and remove the facing panel (a photo on the right).


13.23. Seats

13.25. Average section of the forward panel











https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ