Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment
 







13-13-steklo-dveri-i-steklopodemnik.html

13.13. Glass of a door and стеклоподъемник

Removal and installation

PERFORMANCE ORDER
Glass
1. Remove the panel and the screen.
2. Establish the handle стеклоподъемника (or attach a switch socket, connect the battery to weight).
3. Lower glass so that the bolt of the holder of glass has appeared in an aperture of a skeleton of a door.
4. Supporting glass, turn away bolts of fastening of glass to the holder (are specified by arrows). In cars with a compartment body there is an additional bolt of fastening of glass to a roller of a lobby directing.
5. Get glass through an aperture.
6. Glass is established upside-down. At installation watch that the sealant has not lagged behind. Before panel installation check up work стеклоподъемника.
Стеклоподъемник (a hatchback and a sedan)
1. Disconnect glass from стеклоподъемника (see above).
2. Lift glass and fix a tape or wedges, or get.
3. Disconnect electric drive sockets (if it is provided).
4. Turn away bolts of fastening of a manual drive стеклоподъемника (or the electric drive) (are specified by arrows).
5. Turn on top (a photo at the left) and bottom (a photo on the right) regulator bolts стеклоподъемника and get a regulator through a window aperture. The electric drive with cables gets together with a regulator. Preliminary designate an arrangement of disconnected details.
6. Стеклоподъемник in gathering with a regulator and a drive it is established upside-down. Before panel installation check up work стеклоподъемника.
Compartment
1. Disconnect glass from стеклоподъемника.
2. Disconnect electric drive sockets.
3. Turn away electric drive bolts стеклоподъемника.
4. Turn away bolts of both directing and remove стеклоподъемник in gathering. Preliminary designate an arrangement of disconnected details.
5. Стеклоподъемник it is established upside-down. Before panel installation check up work стеклоподъемника.
Corner of a window of a back door – 5 дверный a hatchback
1. Remove elevating section of glass.
2. Turn away bolts and remove back directing, supporting a corner.
3. Cautiously get a corner with a sealant.
4. Remove from a corner a sealant.
5. The corner is established upside-down.


13.12. The door lock, the switch of the lock and a handle detail

13.14. A cover of a luggage carrier (sedan)











https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ