Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment
 







13-12-zamok-dveri-vyklyuchatel-zamka-i-detali-rukoyatki.html

13.12. The door lock, the switch of the lock and a handle detail

Removal and installation

PERFORMANCE ORDER
The lock
1. Disconnect the battery from weight, remove the internal panel of a door.
2. Disconnect draught from the lock (it is shown by arrows).
3. Turn away screws of fastening of the lock (are shown by arrows).
4. Remove the lock together with the electric drive (if it is provided).
5. The lock is established upside-down. Screws grease with fixing structure.
The switch of the lock and the external handle
1. Disconnect the battery from weight, remove the internal panel of a door.
2. Disconnect draught from drive levers.
3. Turn away a nut and get the handle (arrows nuts of fastening of the door handle are shown).
4. Disconnect from the switch draught, remove скобу and get the switch.
5. The switch is established upside-down.
The internal handle
1. Remove a decorative overlay of the handle.
2. Turn away screws and remove the handle.
3. Disconnect from the handle draught.
4. The handle is established upside-down.


13.11. The internal panel of a door

13.13. Glass of a door and стеклоподъемник











https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ